PA-GFJet | Filament-PM
PA-GFJet- engineering thermoplastic PA12 with 30% glass fibers- thanks to the glass fibers, the material becomes harder and tougher with remaining impact resistance- use for prototyping, 3D-printer parts, construction parts, mechanically and thermally stressed parts- it has similar printing properties as ABS- high heat (up to 160 ° C), impact, chemical and mechanical resistance- thanks to the glass fibers, the material has a rougher matte surface
Technical informations
Thermal properties | |
| HDT-B | 165 °C |
| Vicat softening temperature | 170 °C |
Filament properties | |
| Country of origin | Czechia |
| Filament density | 1.01 g/mm3 |
| Diameter tolerance | 0.03 mm |
Spool weight and dimensions |
How to store filaments
Humidity and UV light can decrease the filament quality and weaken its mechanical properties. We strongly recommend storing open filaments in a dry and dark place. You can find a complete guide on how to properly store your filament here
Where to throw print fails and supports?
We kindly ask our customers to cope with plastic waste responsibly. Failed prints, support material, rafts, or brims should be liquidated according to the local guidelines. Paradoxically, in most cases, it is better to throw this waste in the regular trash can, as most of the material waste created in 3D printing is not identified, which causes more problems than benefits in the waste sorting facilities.
PA-GFJet | Filament-PM
PA-GFJet- engineering thermoplastic PA12 with 30% glass fibers- thanks to the glass fibers, the material becomes harder and tougher with remaining impact resistance- use for prototyping, 3D-printer parts, construction parts, mechanically and thermally stressed parts- it has similar printing properties as ABS- high heat (up to 160 ° C), impact, chemical and mechanical resistance- thanks to the glass fibers, the material has a rougher matte surface
General information about Nylon :
PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry, there are 3 main types of PA which include PA12, PA66, and PA6.
Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally, nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance, and thermal resistance and are widely sought in various industrial applications.
Nylon filaments prove to be challenging materials for FDM printing due to their lower
adhesion to conventional 3D-printing build surfaces and their higher tendency to warp.
Furthermore, there are several classes of PA filaments each behaving differently.
Browse all Nylon filaments in stock in our warehouse in Senec, Slovakia. For comparison, see also CF/GF and PP.
Filament-PM is a Czech filament manufacturer with a wide and still growing range of materials, from everyday PLA and PETG to flame-retardant, ESD and fibre-reinforced engineering grades. It suits beginners and professionals alike. JustCreate3D keeps a large selection of Filament-PM in stock in its warehouse in Senec, Slovakia, and dispatches orders quickly.
Filament-PM was among the first producers of 3D printer filament, starting back in 2013. It is an official partner of PRUSA Manufacturing: the printed parts of the Prusa MK2 and MK3 printers were made from Filament-PM PETG. Today eight production lines run day and night. The company also watches its ecological footprint – its factory runs on renewable energy and it produces recycled filament from its own plastic waste.
Filament-PM at JustCreate3D
- Everyday materials – PLA, PLA+, PETG and the colour Tasty Packs.
- Special finishes – PETG Metal Edition, MarbleJet PLA, GlowJet (glow in the dark) and WoodJet.
- Recycled – RePLA+ and RePETG, made from the manufacturer’s own production waste.
- Technical – ASA, ABS (not Dead), PC/ABS V0, FRJet PETG V0, ESD PETG, CFJet, PA-CFJet, PA-GFJet, PAJet 160, PPJet and PEIJet 1010 Ultem.
- Flexible – RubberJet TPE 88A, RubberJet TPE 32D and TPU 96.
Who is Filament-PM for?
Beginners will appreciate the reliable PLA and PETG; makers looking for something special can try the metal, marble or wood finishes. Engineers get a wide choice of flame-retardant (V0), ESD and carbon or glass-fibre reinforced materials from a single manufacturer.
Frequently asked questions
Is Filament-PM PETG suitable for Prusa printers?
Yes. Filament-PM is an official partner of PRUSA Manufacturing, and the printed parts of the Prusa MK2 and MK3 printers were made from its PETG.
What is the difference between PLA and PLA+?
PLA+ is Filament-PM’s modified version of PLA. How it differs from standard PLA is described in detail in each product description.
Does Filament-PM make recycled filament?
Yes. RePLA+ and RePETG are made from the manufacturer’s own plastic production waste, so they are a simple way to print more sustainably.
Browse all Filament-PM filaments or compare them with other PETG filaments.