ASA | Filament-PM
A classic ASA filament with great stock availability and short lead time. Check the description below for detailed information on the ASA filament properties. Compared to other manufacturers, when printing with ASA from Filament-PM you can return the empty spool and earn credits for your future orders.
Technical informations
Thermal properties | |
| HDT-B | 87 °C |
| Vicat softening temperature | 97 °C |
Filament properties | |
| Country of origin | Czechia |
| Filament density | 1.07 g/mm3 |
| Diameter tolerance | 0.05 mm |
Spool weight and dimensions |
How to store filaments
Humidity and UV light can decrease the filament quality and weaken its mechanical properties. We strongly recommend storing open filaments in a dry and dark place. You can find a complete guide on how to properly store your filament here
Where to throw print fails and supports?
We kindly ask our customers to cope with plastic waste responsibly. Failed prints, support material, rafts, or brims should be liquidated according to the local guidelines. Paradoxically, in most cases, it is better to throw this waste in the regular trash can, as most of the material waste created in 3D printing is not identified, which causes more problems than benefits in the waste sorting facilities.
ASA | Filament-PM
A classic ASA filament with great stock availability and short lead time. Check the description below for detailed information on the ASA filament properties. Compared to other manufacturers, when printing with ASA from Filament-PM you can return the empty spool and earn credits for your future orders.
General information about ASA :
ASA filament is well known for its UV stability and outdoor weather resistance, temperature resistance, chemical resistance, and strong mechanical properties. It has a similar chemical structure to ABS; therefore, it is often referred to as enhanced ABS. ASA typically has a low glow finish compared to other materials. As ASA can be as tricky as ABS for 3D printing, some manufacturers have developed a slightly weaker version of ASA (ASA 275) which features the same UV stability and chemical resistance, but in a tradeoff for mechanical properties. ASA 275 has become widely popular for its ease of print.
Printability of ASA filament
ASA can be as tricky as ABS for 3D printing; a heated chamber is recommended as well as a suitable adhesive. The hotbed temperature ranges from 90°C to 130°C depending on the manufacturer's recommendations. The extruder is typically around 245°C, with a printing speed of up to 90mm/s. Cooling is not recommended as it would improve the already present warping effect of ASA (with ASA 275, cooling is recommended).
ASA mechanical and thermal properties
ASA's Tg is typically around 100°C, with a typical HDT-A of 90°C. If printed correctly, ASA exhibits strong mechanical properties and is the perfect candidate for any outdoor use. Printed objects from ASA have a hard surface and feature superior toughness compared to ABS which is stiffer.
Tips and other notable benefits
ASA is mildly hygroscopic; drying may be necessary before printing.
Browse all ASA filaments in stock in our warehouse in Senec, Slovakia. For comparison, see also ABS and PETG.
Filament-PM is a Czech filament manufacturer with a wide and still growing range of materials, from everyday PLA and PETG to flame-retardant, ESD and fibre-reinforced engineering grades. It suits beginners and professionals alike. JustCreate3D keeps a large selection of Filament-PM in stock in its warehouse in Senec, Slovakia, and dispatches orders quickly.
Filament-PM was among the first producers of 3D printer filament, starting back in 2013. It is an official partner of PRUSA Manufacturing: the printed parts of the Prusa MK2 and MK3 printers were made from Filament-PM PETG. Today eight production lines run day and night. The company also watches its ecological footprint – its factory runs on renewable energy and it produces recycled filament from its own plastic waste.
Filament-PM at JustCreate3D
- Everyday materials – PLA, PLA+, PETG and the colour Tasty Packs.
- Special finishes – PETG Metal Edition, MarbleJet PLA, GlowJet (glow in the dark) and WoodJet.
- Recycled – RePLA+ and RePETG, made from the manufacturer’s own production waste.
- Technical – ASA, ABS (not Dead), PC/ABS V0, FRJet PETG V0, ESD PETG, CFJet, PA-CFJet, PA-GFJet, PAJet 160, PPJet and PEIJet 1010 Ultem.
- Flexible – RubberJet TPE 88A, RubberJet TPE 32D and TPU 96.
Who is Filament-PM for?
Beginners will appreciate the reliable PLA and PETG; makers looking for something special can try the metal, marble or wood finishes. Engineers get a wide choice of flame-retardant (V0), ESD and carbon or glass-fibre reinforced materials from a single manufacturer.
Frequently asked questions
Is Filament-PM PETG suitable for Prusa printers?
Yes. Filament-PM is an official partner of PRUSA Manufacturing, and the printed parts of the Prusa MK2 and MK3 printers were made from its PETG.
What is the difference between PLA and PLA+?
PLA+ is Filament-PM’s modified version of PLA. How it differs from standard PLA is described in detail in each product description.
Does Filament-PM make recycled filament?
Yes. RePLA+ and RePETG are made from the manufacturer’s own plastic production waste, so they are a simple way to print more sustainably.
Browse all Filament-PM filaments or compare them with other PETG filaments.