RePETG | Filament-PM
RePETG is manufactured from PETG material from Filament-PM that didn't pass the diameter tolerance tests or didn't meet the required color shade. The material wounded on these spools is then re-granulated, dried, and re-extruded into filament. It is important to note that the filament color will be slightly different each time, ranging from various shades of grey to army green. It is an environmentally wise choice to print prototypes with this material as otherwise, it would have ended in the trash can.
Technical informations
Thermal properties | |
| HDT-B | 70 °C |
| Vicat softening temperature | 85 °C |
| Drying settings | 65 °C for 4 h |
Filament properties | |
| Country of origin | Czechia |
| Filament density | 1.27 g/mm3 |
| Diameter tolerance | 0.05 mm |
| Recommended adhesive | NonOilen® |
Spool weight and dimensions |
How to store filaments
Humidity and UV light can decrease the filament quality and weaken its mechanical properties. We strongly recommend storing open filaments in a dry and dark place. You can find a complete guide on how to properly store your filament here
Where to throw print fails and supports?
We kindly ask our customers to cope with plastic waste responsibly. Failed prints, support material, rafts, or brims should be liquidated according to the local guidelines. Paradoxically, in most cases, it is better to throw this waste in the regular trash can, as most of the material waste created in 3D printing is not identified, which causes more problems than benefits in the waste sorting facilities.
RePETG | Filament-PM
RePETG is manufactured from PETG material from Filament-PM that didn't pass the diameter tolerance tests or didn't meet the required color shade. The material wounded on these spools is then re-granulated, dried, and re-extruded into filament. It is important to note that the filament color will be slightly different each time, ranging from various shades of grey to army green. It is an environmentally wise choice to print prototypes with this material as otherwise, it would have ended in the trash can.
According to Filament-PM, RePETG has the same printing properties as classic PETG. To our knowledge, each time plastic is heated and extruded; its chemical structure is modified, weakening its mechanical properties. Hence, it is a safe bet to say that the mechanical properties are lower than classic PETG.
General information about PETG :
Printability of PETG filament
PETG is such a popular filament for a lot of reasons. It has a perfect interlayer adhesion without a heated chamber (which is often a problem compared, for instance, to ABS). Its flawless and continuous nozzle flow combined with zero warp makes it a perfect partner for long print jobs and for printing large objects without the need for a heated chamber. For those reasons, PETG is the bestselling material across the FDM 3D printing industry. Compared to PLA, PETG tends to string a little bit, a problem that can be easily fixed by tweaking your retraction settings.
PETG mechanical and thermal properties
PETG is the perfect combination of the mechanical goodness of ABS and the ease of printing of PLA. It is tougher than PLA, meaning that it doesn't crack as easily when under pressure. It also has improved impact resistance and thermal resistance of 73°C. Imagine the mechanical properties of a PET plastic bottle; that should give you a reasonable illustration of the strength of this material.
Tips and other notable benefits
Raw PETG is glossy, and so, if not explicitly specified otherwise in the short product description, the surface finish will be glossy. This property can be slightly tweaked by adjusting the cooling fan speed; the more you cool, the more matt will be the finished part. On the other hand, the less you cool the print, the stronger it will be.
PETG has such a wide range of applications, that for instance, it is highly probable that your 3D printer has parts printed from PETG. This material is odorless, and generally speaking, it is okay to use it in contact with food. (Although not every manufacturer provides a certificate for food compliance. Also, please note that for use in official applications you would need to re-certify it, more here). While printing with PETG, no toxic fumes or vapor are released like with ABS.
Browse all PETG filaments in stock in our warehouse in Senec, Slovakia. For comparison, see also PLA and PCTG.
Filament-PM is a Czech filament manufacturer with a wide and still growing range of materials, from everyday PLA and PETG to flame-retardant, ESD and fibre-reinforced engineering grades. It suits beginners and professionals alike. JustCreate3D keeps a large selection of Filament-PM in stock in its warehouse in Senec, Slovakia, and dispatches orders quickly.
Filament-PM was among the first producers of 3D printer filament, starting back in 2013. It is an official partner of PRUSA Manufacturing: the printed parts of the Prusa MK2 and MK3 printers were made from Filament-PM PETG. Today eight production lines run day and night. The company also watches its ecological footprint – its factory runs on renewable energy and it produces recycled filament from its own plastic waste.
Filament-PM at JustCreate3D
- Everyday materials – PLA, PLA+, PETG and the colour Tasty Packs.
- Special finishes – PETG Metal Edition, MarbleJet PLA, GlowJet (glow in the dark) and WoodJet.
- Recycled – RePLA+ and RePETG, made from the manufacturer’s own production waste.
- Technical – ASA, ABS (not Dead), PC/ABS V0, FRJet PETG V0, ESD PETG, CFJet, PA-CFJet, PA-GFJet, PAJet 160, PPJet and PEIJet 1010 Ultem.
- Flexible – RubberJet TPE 88A, RubberJet TPE 32D and TPU 96.
Who is Filament-PM for?
Beginners will appreciate the reliable PLA and PETG; makers looking for something special can try the metal, marble or wood finishes. Engineers get a wide choice of flame-retardant (V0), ESD and carbon or glass-fibre reinforced materials from a single manufacturer.
Frequently asked questions
Is Filament-PM PETG suitable for Prusa printers?
Yes. Filament-PM is an official partner of PRUSA Manufacturing, and the printed parts of the Prusa MK2 and MK3 printers were made from its PETG.
What is the difference between PLA and PLA+?
PLA+ is Filament-PM’s modified version of PLA. How it differs from standard PLA is described in detail in each product description.
Does Filament-PM make recycled filament?
Yes. RePLA+ and RePETG are made from the manufacturer’s own plastic production waste, so they are a simple way to print more sustainably.
Browse all Filament-PM filaments or compare them with other PETG filaments.