ABS Extrafill | Fillamentum
ABS Extrafill is acclaimed by the 3D printing community as one of the "better" ABS filaments, but keep in mind that it is still regular ABS and it comes with all its disadvantages. This filament is well suited for printing small and detailed parts. It has also proven to be a good candidate for smoothing with ABS fumes. Filaments from the Fillamentum Extrafill family, are known to have rich colors tones.
Technical informations
Thermal properties | |
| HDT-A | 81 °C |
| Vicat softening temperature | 96 °C |
| Drying settings | 80 °C for 2 h |
Filament properties | |
| Country of origin | Czechia |
| Filament density | 1.04 g/mm3 |
| Diameter tolerance | 0.05 mm |
| Recommended adhesive | Magigoo Adhesive – The Original 50ml |
Spool weight and dimensions |
How to store filaments
Humidity and UV light can decrease the filament quality and weaken its mechanical properties. We strongly recommend storing open filaments in a dry and dark place. You can find a complete guide on how to properly store your filament here
Where to throw print fails and supports?
We kindly ask our customers to cope with plastic waste responsibly. Failed prints, support material, rafts, or brims should be liquidated according to the local guidelines. Paradoxically, in most cases, it is better to throw this waste in the regular trash can, as most of the material waste created in 3D printing is not identified, which causes more problems than benefits in the waste sorting facilities.
ABS Extrafill | Fillamentum
ABS Extrafill is acclaimed by the 3D printing community as one of the "better" ABS filaments, but keep in mind that it is still regular ABS and it comes with all its disadvantages. This filament is well suited for printing small and detailed parts. It has also proven to be a good candidate for smoothing with ABS fumes. Filaments from the Fillamentum Extrafill family, are known to have rich colors tones.
General information about ABS :
ABS filaments were among the first, together with PLA, to enter the 3D printing material industry. As it was known for its good mechanical and thermal properties by the plastic industry, this material is not well suited for the 3D printing industry because of its bad printability. A popular use case of ABS was its ease of g postprocessing with acetone fumes. This dangerous and hazardous process can now be avoided by combining PolySmooth (PVB) filaments with isopropyl alcohol (and optionally the Polysher machine).
Printability of ABS filament
ABS is a hard-to-print material, and to be honest, there is almost always a better alternative to ABS. In the past years, PETG has been rapidly taking over ABS as it is much easier to print with and features similar mechanical properties. Printing ABS requires an enclosure, a strong adhesive, and a very hot hotbed (at least 100°C). ABS tends to warp a lot, and therefore we recommend printing only smaller parts. ABS cannot be cooled, as cooling drastically increase the warping effect and lower its interlayer adhesion, effectively lowering the printed parts' mechanical properties.
ABS mechanical and thermal properties
ABS has a typical thermal resistance of around 85°C and (if printed correctly) provides strong mechanical properties. Although, with the same printing gear and setting, much more advanced materials like PolyCarbonate or Nylon can be printed, which feature drastically better mechanical properties.
Tips and other notable benefits
Printing with ABS releases toxic and smelly ABS fumes. We don't recommend printing with ABS in a home environment. Printing with ABS filaments should be done in an air-filtered chamber or well-ventilated room.
Browse all ABS filaments in stock in our warehouse in Senec, Slovakia. For comparison, see also ASA and PC.
Fillamentum is a Czech manufacturer of premium 3D printing filaments, known for a very wide colour range and unique shades. It is a favourite of makers who care about the look of their prints, and it also offers technical materials such as CPE, nylon and flexible grades. JustCreate3D keeps a broad Fillamentum selection in stock in its warehouse in Senec, Slovakia, and dispatches orders quickly.
Based in Czechia, Fillamentum is one of the trendsetters of the 3D printing material industry. It exports to more than 62 countries and has more than 15 years of experience in plastics processing. Its filaments come on transparent spools, so you can always see how much material is left.
Fillamentum at JustCreate3D
- PLA – PLA Extrafill in many colours, PLA Crystal Clear and NonOilen®.
- Technical – CPE HG100, CPE CF112 Carbon, ASA Extrafill, HIPS Extrafill, PC/ABS, PP 2320 and Fluorodur (PVDF).
- Nylon – Nylon FX256, Nylon CF15 Carbon, Nylon AF80 Aramid, plus ORCA® Nylon PA6 + CF10 and Porthcurno Nylon PA6 by Fishy Filaments.
- Flexible (Flexfill) – Flexfill TPU 92A, Flexfill TPU 98A, Flexfill TPE 90A, Flexfill TPE 96A and Flexfill PEBA 90A.
- Special – Timberfill® wood composite and Vinyl 303.
- Accessories – the LockPAd build plate for nylons and the Lemonesol solvent.
Who is Fillamentum for?
Choose PLA Extrafill when colour and surface quality matter – for models, prototypes and decorations. CPE HG100 is a tougher, easy-to-print alternative to PETG for functional parts. The Flexfill range covers flexible parts from soft to semi-rigid, and the nylon grades suit wear-resistant mechanical parts; remember to dry nylon before printing.
Frequently asked questions
Where is Fillamentum made?
Fillamentum is a Czech brand. Its filaments are exported to more than 62 countries around the world.
What is CPE HG100?
CPE is a copolyester related to PETG. It was developed for users who want more toughness than PETG while keeping easy printing with no warping.
Which Flexfill should I choose?
The number in the name is the Shore hardness: the lower the number, the softer and more elastic the part. Flexible filaments print best slowly, ideally with a direct-drive extruder.
Browse all Fillamentum filaments, or see all CPE and flexible filaments.