Multimaterial Starterpack (6x 330g) | Devil Design
This starter pack contains 6x 0.33kg filaments of various materials of natural colors from the brand Devil Design: PLA, ABS+, PETG, TPU, ASA, HIPS
Technical informations
Thermal properties |
Filament properties | |
| Country of origin | Poland |
| Filament density | 1.25 g/mm3 |
| Diameter tolerance | 0.05 mm |
Spool weight and dimensions |
How to store filaments
Humidity and UV light can decrease the filament quality and weaken its mechanical properties. We strongly recommend storing open filaments in a dry and dark place. You can find a complete guide on how to properly store your filament here
Where to throw print fails and supports?
We kindly ask our customers to cope with plastic waste responsibly. Failed prints, support material, rafts, or brims should be liquidated according to the local guidelines. Paradoxically, in most cases, it is better to throw this waste in the regular trash can, as most of the material waste created in 3D printing is not identified, which causes more problems than benefits in the waste sorting facilities.
Multimaterial Starterpack (6x 330g) | Devil Design
This starter pack contains 6x 0.33kg filaments of various materials of natural colors from the brand Devil Design: PLA, ABS+, PETG, TPU, ASA, HIPS
General information about ABS :
ABS filaments were among the first, together with PLA, to enter the 3D printing material industry. As it was known for its good mechanical and thermal properties by the plastic industry, this material is not well suited for the 3D printing industry because of its bad printability. A popular use case of ABS was its ease of g postprocessing with acetone fumes. This dangerous and hazardous process can now be avoided by combining PolySmooth (PVB) filaments with isopropyl alcohol (and optionally the Polysher machine).
Printability of ABS filament
ABS is a hard-to-print material, and to be honest, there is almost always a better alternative to ABS. In the past years, PETG has been rapidly taking over ABS as it is much easier to print with and features similar mechanical properties. Printing ABS requires an enclosure, a strong adhesive, and a very hot hotbed (at least 100°C). ABS tends to warp a lot, and therefore we recommend printing only smaller parts. ABS cannot be cooled, as cooling drastically increase the warping effect and lower its interlayer adhesion, effectively lowering the printed parts' mechanical properties.
ABS mechanical and thermal properties
ABS has a typical thermal resistance of around 85°C and (if printed correctly) provides strong mechanical properties. Although, with the same printing gear and setting, much more advanced materials like PolyCarbonate or Nylon can be printed, which feature drastically better mechanical properties.
Tips and other notable benefits
Printing with ABS releases toxic and smelly ABS fumes. We don't recommend printing with ABS in a home environment. Printing with ABS filaments should be done in an air-filtered chamber or well-ventilated room.
Browse all ABS filaments in stock in our warehouse in Senec, Slovakia. For comparison, see also ASA and PC.
Devil Design is a Polish filament manufacturer known for reliable PLA and PETG with a good quality-to-price ratio and a wide colour range. Its filaments suit hobby makers and anyone who prints a lot and wants consistent results without paying for a premium label. JustCreate3D keeps Devil Design in stock in its warehouse in Senec, Slovakia, and dispatches orders quickly.
Devil Design has been making filaments since 2014 and runs six production lines non-stop. Its materials are known for good flow and quality even at higher printing speeds. The founders are also behind reprapy.pl, a Polish 3D printing community forum launched in 2016.
Devil Design filaments at JustCreate3D
- Everyday PLA – PLA, the glossy PLA SILK and PLA Glow in the Dark.
- PETG – PETG for tougher functional parts.
- Technical materials – ASA for outdoor parts, HIPS as a support or lightweight material, the nylon PA12 and the flexible TPU 55D.
- Starter packs (6 × 330 g) – PLA Multicolor Starterpack, PETG Multicolor Starterpack, Multimaterial Starterpack: a cheap way to try several colours or materials.
How to choose
New to 3D printing? Start with PLA. If your parts need more toughness, go for PETG; for parts exposed to sun and weather, choose ASA, which prints best in an enclosed printer. Not sure which material suits you? The Multimaterial Starterpack lets you test six materials in smaller spools.
Frequently asked questions
Is Devil Design good for fast printers?
Devil Design filaments are known for good flow and stable quality even at higher printing speeds, so they are a popular choice for modern, faster printers. Always start from the temperature range printed on the spool.
What is in the starter packs?
Each starter pack contains six spools of 330 g. The PLA and PETG packs offer six colours of one material; the Multimaterial pack combines different materials, such as PLA, PETG, ABS, ASA, HIPS and TPU.
Where is Devil Design made?
Devil Design is a Polish manufacturer. It has been producing filaments on its own production lines since 2014.
Browse all Devil Design filaments, or compare with other PLA and PETG filaments.