3Dlac

3DLAC is a bed adhesive for FDM 3D printers that keeps the first layer firmly in place during printing and lets the part go once the bed cools down. It is for anyone who struggles with warping or prints coming loose during long jobs. JustCreate3D keeps 3DLAC in stock in its warehouse in Senec, Slovakia, so orders are dispatched quickly.

The brand has been on the market for more than 10 years and is sold in over 50 countries. One spray can lasts for up to 400 uses, which makes it a very economical way to improve bed adhesion.

3DLAC products at JustCreate3D

• 3DLAC adhesive spray – the classic aerosol. A light mist sprayed from about 20 cm is enough, with up to 400 uses per can. Best suited for PLA, PETG, PVB, CPE and wood-filled filaments.
• 3DLAC Plus – a formula that keeps parts fixed throughout the whole print and can be used directly on glass or mirror beds.
• 3DLAC Stick – the same adhesive in a format with an applicator. Press it against the bed for a couple of seconds and spread a thin, even layer exactly where you need it.

Tips for use

Apply a thin layer to a clean print bed and let it evaporate before you start printing. While the bed is hot, the plastic stays firmly attached; once the print has cooled down, it comes off without damage.

Frequently asked questions

Which filaments does 3DLAC work with?

The spray is mainly intended for standard materials such as PLA, PETG, PVB, CPE and wood filaments; with CPE it also works as a separation layer. For nylon, polycarbonate or polypropylene a dedicated adhesive is usually the better choice – you will find these among our accessories.

How long does one can last?

According to the manufacturer, one 3DLAC spray can is enough for up to 400 uses, because only a light mist is needed for each print.

Will the print come off after printing?

Yes. The adhesive holds the part while the bed is hot. When the bed cools, the print releases smoothly, so you do not have to pry it off and risk damaging the part or the bed.

Browse all bed adhesives and other accessories in the 3D printing accessories category.